Table of Contents
Advertisement
RUN NOW Excite +: Technical Service guide - rev. 6.2
(3)
Check if the receiver has been correctly mounted on the machine, as detail at paragraph: 7.6.
"Disassembling the HS/HR cardio receiver (Chest Belt / Hand Sensor)".
(4)
To check for electromagnetic noise near the machine, use Test Box Excite as detailed here
below. You can use one of the following cables ELT-16 (0WC00518AB), CBQ-28
(0WC00390AC) or TRM-28 (0WC00336AC) as connection cable.
RECEIVER
The circuit lights the LED for each heart beat and/or disturbance received: in this way it is
possible to determine whether there is any interference, and identify its sources.
Do not keep the Test Box Excite too close to the display, to avoid the electric
interference.
Connecting cable
LED
TEST BOX
EXCITE
Page 6.43
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the RUN NOW EXCITE + and is the answer not in the manual?
Questions and answers