Smv Type Number Designation - Lenze ESV251 1S Series Operating Instructions Manual

2.2

SMV Type Number Designation

The table herein describes the Type numbering designation for the SMVector Inverter models.
Electrical Products in the SMVector Series
Power Rating in kW:
251 = 0.25kW (0.33HP)
371 = 0.37kW (0.5HP)
751 = 0.75kW (1HP)
112 = 1.1kW (1.5HP)
152 = 1.5kW (2HP)
222 = 2.2kW (3HP)
302 = 3.0kW (4HP)
402 = 4.0kW (5HP)
552 = 5.5kW (7.5HP)
752 = 7.5kW (10HP)
Installed I/O & Communication Module(s):
C_ = CANopen (Available all models)
D_ = DeviceNet (Available all models)
E_ = Ethernet/IP, (Available all models)
R_ = RS-485 / ModBus /Lecom (Avail all models)
P_ = ProfiBus-DP (Available all models)
N_ = No Communications installed
Input Voltage:
1 = 120 VAC (doubler output) or 240 VAC
2 = 240 VAC
4 = 400/480 VAC
6 = 600 VAC
Input Phase:
S = Single Phase Input only
Y = Single or Three Phase Input
T = Three Phase Input only
Input Line Filter
F = Integral EMC Filter
L = Integral EMC Filter and Integrated Disconnect Switch (NEMA 4X/IP65 Models only)
M = Integrated Disconnect Switch (NEMA 4X/IP65 Models only)
X = No EMC Filter/ No Disconnect Switch
Enclosure:
B = NEMA 1/IP31; Indoor only
C = NEMA 4X/IP65; Indoor only; Convection cooled
D = NEMA 4X/IP65; Indoor only; Fan cooled
E = NEMA 4X/IP65; Indoor/Outdoor; Convection cooled
F = NEMA 4X/IP65; Indoor/Outdoor; Fan cooled
NOTE
Prior to installation make sure the enclosure is suitable for the end-use environment
Variables that influence enclosure suitability include (but are not limited to) temperature, airborne
contaminates, chemical concentration, mechanical stress and duration of exposure (sunlight,
wind, precipitation)
8
Technical Data
.
ESV 152
113 = 11.0kW (15HP)
153 = 15.0kW (20HP)
183 = 18.5kW (25HP)
223 = 22.0kW (30HP)
303 = 30.0kW (40HP)
373 = 37.5kW (50HP)
453 = 45.0kW (60HP)
The "_" blank can be:
0 = Standard Keypad
Lenze SMVector 13554876 EDBSV01 EN v21.0
N0 2 T X B