Alinx KINTEX UltraScale FPGA AXKU042 User Manual page 7

2) 1 PCIE3.0 X8 interface, endpoint mode, for PCIE data communication with
PC.
3) USB Uart interface for communication with PC for user-friendly debugging.
The serial chip adopts Silicon Labs CP2102GM USB-UART chip, and the
USB interface adopts MINI USB interface.
4) One 10/100M/1000M Ethernet RJ45 interface for Ethernet data exchange
with PC or other network devices. The network interface chip uses Micrel's
KSZ9031 industrial grade GPHY chip.
5) 3 standard FMC expansion ports, including 2 LPC expansion ports and 1
HPC expansion port. It can be connected to XILINX or ALINX FMC modules
(HDMI input/output module, binocular camera module, high-speed AD
module, etc.).
6) 1 Micro SD card holder for FPGA to read, write and store data on SD card.
7) 2 SMA external interface, pin connection to the common clock signal, for
external input and output signals
8) Onboard a temperature and humidity sensor chip LM75, used to detect the
temperature and humidity of the environment around the board.
9) On-board EEPROM for IIC bus communication and storage of some
customer-defined information
10)10-pin 2.54mm standard JTAG port for FPGA program download and
debugging, users can debug and download the FPGA through XILINX
downloader.
11) On-board 2 differential crystal of 156.25Mhz to provide reference clock for
transceiver.
12)7 LEDs, 1 power indicator, 4 user indicators and a pair of panel indicators.
13)2 KEYs, including a reset key and one user key that connected to the
common IO of the FPGA.
7 / 56
KINTEX UltraScale+ FPGA Board AXKU042 User Manual
Amazon Store: https://www.amazon.com/alinx
a