General information
Rigid models require 0 – 1 double-acting oil outlets (see technical specifications p. 5)
Attachment (rigid lift-mounted machines)
1. Reverse the tractor to the machine and attach it.
2. Lift the machine to maximum transport height.
Uncoupling (rigid lift-mounted machines)
1. Lower the machine onto level, firm ground, and release all hydraulic hoses.
2. Lower the support leg.
3.
The machine may now be uncoupled.
Attachment (rigid trailed machines)
1. Reverse the tractor to the machine.
2. Fasten all hydraulic hoses on the tractor outlets.
3. Apply pressure to the drawbar-wheel cylinder until the drawbar reaches the right height.
4. Reverse the tractor and attach the machine.
5. Lift the machine to maximum height and lift the support leg.
Uncoupling (rigid trailed machines)
1.
Lower the machine onto level, firm ground.
2.
Lower the support leg.
3.
Adjust the drawbar-wheel cylinder (red), so that the drawbar pin is loosened
4.
The machine may now be uncoupled.
5.
Move the tractor slightly forward to relaese all hydraulic hoses.
Triple-Tiller
Start-up
10
10-07-2023