Table of Contents
Advertisement
Lubrification
When lubricating, maintaining and repairing the Triple-Tiller, always lower the machine, brake the tractor
and stop the engine.
The typical lubricating points are: by the roller, spindle, side section and the arms of the roller bar. The
lubricating points must be lubricated after 10 hours of operation, and before/after cleaning in order to
drive out any water or dirt. The lubricating points are placed by movable parts, as well as by the ball
bearings and cylinders.
X
= Lubrication point
NOTE!
IMPORTANT!
Triple-Tiller
The double density ball bearings in the roller should only be lubricated
every 20 hours, and with 1-2 strokes so as not to press out the sealing
rings.
The hydraulic system is filled with oil type Hydro Texaco HD32
13
10-07-2023
Advertisement
Table of Contents
