General information
Terra-Dan MKII lift-mounted requires 1 double-acting oil outlet.
Terra-Dan MKII trailed requires 2 double-acting oil outlets.
Attachment and uncoupling
From transport to working position:
1. Raise the machine to maximum transport height.
2. First, fold in the wings to relieve the locking pawls, then, extend the wings completely, and put
the hydraulic outlet in neutral, NOT flow position.
3. Lower the machine and adjust the working depth.
(See section: Instructions and adjustment of the harrow)
From working to transport position:
1. Raise the machine to maximum transport height.
2. Fold in the wing sections.
After the first 10 hours of operation, retighten the machine. Check hydraulic hoses, fittings and
cylinders for leaks and retighten.
Ensure on a regular basis that all bolts are tightened.
Before the winter storage, wash and lubricate the machine. If you use high-pressure cleaner, do
not spray directly on the ball bearings. After the washing, you may spray the machine with oil.
Terra-Dan MKII
Start-up of the machine
Make sure that the wing sections are locked.
Maintenance
10
24-04-2018