Mitsubishi Electric GOT1000 GT14 User Manual page 188


Display example of Logging information
Logging Information
(1)
Number
(1) Select drive
(2) Kind
(3) Name
(4) Path name
(5) Size
(6) The size of drive
(7) Operation switch
(8) Number of files
POINT POINT POINT
(1) About the displayed file
The files other than that for logging are not displayed on the logging information screen.
(2) Folders and files displayed
For the folders and files displayed, refer to the following.
13 - 54
13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
13.2 Various Data Control
Item
The target drive can be selected. (Even if SD card is not installed, this message appears.)
Indicates the type of the displayed name (file or folder).
In case of file, displays the extension; in case of folder, displays "DIR".
Displays the file name or folder name.
For the long file/folder name, entire part may not be displayed.
Confirm the nondisplayed part with the [Rename] button, etc.
( 13.2.6
After confirmation, touch the [Cancel] button to cancel the operation.
Displays the path name of drive/folder which is currently displayed.
Displays the size of the file displayed in [Name].
Displays the size in use and the entire size of the drive which is selected by drive selection.
Execution switch of each function.
Displays the total number of the displayed files.
13.1.4 Display file
Logging Information
Storage file/folder display screen
(2) (3)
(6)
Description
■
Logging information operation (6)Rename operation)
(4)
(5)
(8)
(7)