Dürkopp Adler 650-16 Operating Manual page 37

Operating and programming the control unit
1. Sew, actuate the knee switch or press "OK".
Instruction manual 650-16 Version 00.0 - 07/2013
Symbol Meaning
Additional parameters
Foot Press. (sewing foot pressure)
Fulln. Corr.
• Press
• Press "OK".
• Press "
sewing foot pressure.
• Select the parameter by pressing "OK".
• Press "
• Confirm by pressing "OK".
• Press
Program bar
Length pre stitch in mm,
or dash (-) if there is no auto-
matic step change
P Programming mode
Switches to the programming mode
No function
ESC, F, S
The machine switches to the 1st step.
 /  to select "Other parameters".
" and " " to select fullness correction or
 
" and " " to change the value.
 
 or "ESC" to quit the menu.
35