Dürkopp Adler 650-16 Operating Manual page 32

30
Symbol Meaning
Stitch length
Value range: 1.0 to 5.5 mm
• Select the "Stitch length" parameter using buttons
" 
• Change the stitch length using buttons "
and "
Thread tension
Value range: 1 to 99
• Select the "Thread tension" parameter using buttons
" 
• Change the thread tension using buttons "
and "
Curve support
Value range: 0 to 6
• Select the "Curve support" parameter using buttons
" 
• Change the curve support using buttons "
and "
Additional parameters

( Chap. 9.4.2, p. 32)
Seam length in mm
After trimming the thread, the display is kept. When
you tack on again, a new measurement is performed
P
Creating a program(
+/- Changing between fullness top
and fullness bottom
ESC, F and S No function
0 – 16 Fullness values
OK No function
Operating and programming the control unit
" and "  ".
".

" and "  ".
 ".
" and "  ".
 ".

Chap. 9.8.1, p. 45)
Instruction manual 650-16 Version 00.0 - 07/2013
 "
 "
 "