Configure Your Device; Basic Settings; Adjust The Image - Axis P47-PLVE Series User Manual

AXIS P47-PLVE series

Configure your device

Configure your device

Basic settings

Set the power line frequency
1. Go to Video > Installation > Power line frequency.
2. Click Change.
3. Select a power line frequency and click Save and restart.
Set the orientation
1. Go to Video > Installation > Rotate.
2. Select 0 , 90, 180 or 270 degrees.
See also Monitor long and narrow areas on page 9 .

Adjust the image

This section includes instructions about configuring your device. If you want to learn more about how certain features work, go
to Learn more on page 50.
Level the camera
To adjust the view in relation to a reference area or an object, use the level grid in combination with a mechanical adjustment
of the camera.
1. Go to Video > Image > and click
2. Click
3. Adjust the camera mechanically until the position of the reference area or the object is aligned with the level grid.
Adjust the zoom and focus
To adjust the zoom:
1. Go to Video > Installation and adjust the zoom slider.
To adjust the focus:
1. Click
2. Adjust the autofocus area to cover the part of the image that you want to be in focus.
If you don't select an autofocus area, the camera focuses on the entire scene. We recommend that you focus on a
static object.
3. Click Autofocus.
4. To fine tune the focus, adjust the focus slider.
to show the level grid.
to show the autofocus area.
.
6