Veritas R8 Plus & Excel Installation Manual
Zone Connections
Detection devices such as PIR's, Door Contacts, PA Buttons etc. are all connected to the 8 zone terminals on the Veritas R8 Plus and Veritas
Excel control panel.
If a zone is not being used it should be either linked out or disabled (see page 30).
Magnetic Contacts and Panic Buttons
These are connected to one of the eight terminal pairs labelled Z1 to Z8 on the control panel.
Figure 1a - Wiring a Single Magnetic Contact to a Zone (see also Figure 4).
Figure 1b - Wiring Multiple Magnetic Contacts to a Zone (see also Figure 4).
Mixing powered detectors and magnetic contacts on one zone is easiest if the wiring is taken from the control panel to the powered
detectors first.
INS045-14
Figure 1 - Wiring Magnetic Contacts
Installation
11