Table of Contents
Advertisement
Veritas R8 Plus & Excel Installation Manual
Null
The Null level is the only level which can be changed both by a
Master User and by a Boss Engineer. The Null level has two
functions:
If a user is no longer required, their Access Level should be
changed to Null. This will erase the associated Access
code.
To change a Customer Access Type to an Installer Access
Type, or vice versa, it must first be changed to the Null
Code Type.
Boss Engineer
Boss Engineer level can access all the Engineer programming
options and can also assign Access Level Engineer (Level 2).
Access Types
There are two Access Types, Customer and Installer. The Boss
Engineer Level can only program the Installer Types. The Master
User Level can only program the Customer Types.
The table below shows a summary of each Access Level and who
is responsible for assigning the Level:
Access
Access
Level
Level
Number
User
Engineer
PA (Panic)
Duress
Master User
Cleaner
Null
Boss
Engineer
The Master User can only assign Customer Access Types
and the Boss Engineer can only assign Installer Access
Types.
INS045-14
Access
Can be
Type
Programmed by
Customer
Master
Installer
Boss
Customer
Master
Customer
Master
Customer
Master
Customer
Master
Customer
Master
Installer
Boss
Boss
Installer
Changing Your Own Access Code
Each user has a programmable 4 digit Personal Identification
Number (PIN) which the user enters in order to operate the alarm
system.
Every user has the ability to change their own 4 digit Access code,
as follows:
From the Programming Menu, enter
like this.
Zon es
U n set
1 2 3 4 5 6 7 8
T am p er
Enter the new Access code
indicate as each digit of the new code is entered. Press
the system will chime to confirm the new code has been accepted.
The system will then automatically revert to the Programming
Menu.
Assigning New Access Codes
The Master User can assign a new Access code or change an
existing Access code providing it is a Customer Type. The Boss
Engineer can assign a new Access code or change an existing
Access code providing it is an Installer Type.
Programming Access Codes
From the Programming Menu, enter
Number
to
i.e. for User 5, enter
look like this.
Zon es
U n set
1 2 3 4 5 6 7 8
T am p er
Enter the new Access code
indicate as each digit of the new code is entered. Press
the system will chime to confirm the new code has been accepted.
The system will then automatically revert to the Programming
Menu.
Programming Access Levels
From the Programming Menu, enter
Number
to
i.e. for User 5, enter
show the Access Level currently selected.
Zon es
U n set
1 2 3 4 5 6 7 8
T am p er
Press the number of the Access Level required
User, enter 1. Press
the new Access Level has been accepted. The system will then
automatically revert to the Programming Menu.
Programming the Control Panel
. The display will look
. The display will
-
-
followed by the User
. The display will
. The display will
-
followed by the User
. The display will
, i.e. for
, the system will chime to confirm
,
,
33
Advertisement
Table of Contents
