Chapter 2. Server Components; Front View - Lenovo ThinkEdge SE350 V2 User Manual

Chapter 2. Server components

This section contains information about each of the components associated with the server.

Front view

This section contains information about the controls, LEDs, and connectors in the front of the server,
including the front I/O modules.
Based on two types of drive assemblies and two types of I/O module boards, there are four possible
configurations of ThinkEdge SE350 V2.
• One of the following drive assemblies:
– (Selectable) Up to four 7mm 2.5-inch hot-swap drives, supporting SATA or NVMe drives
– (Selectable) Up to two 15mm 2.5-inch hot-swap drives, supporting NVMe drives
• One of the following I/O module:
– (Selectable) 10/25GbE I/O module
– (Selectable) 1GbE I/O module
Server front views of different configurations
Figure 2. Front view of SE350 V2, 7mm drives with 10/25GbE I/O module
Figure 3. Front view of SE350 V2, 15mm drives with 1GbE I/O module
Notes:
• Above are the front views of
– 7mm drives with 10/25GbE I/O module; and
– 15mm drives with 1GbE I/O module.
• In addition, the other two configurations of ThinkEdge SE350 V2 include:
– 7mm drives with 1GbE I/O module; and
– 15mm drives with 10/25GbE I/O module.
© Copyright Lenovo 2023
17