Optional-Device Problems - Lenovo ThinkEdge SE350 V2 User Manual

pubs.lenovo.com/lxpm-overview/
POST Attempts Limit. Available options are 3, 6, 9, and disable.
Voltage planar fault is displayed in the event log
Complete the following steps until the problem is solved.
1. Revert the system to the minimum configuration. See
required number of processors and DIMMs.
2. Restart the system.
• If the system restarts, add each of the removed items one at a time and restart the system each time
until the error occurs. Replace the item for which the error occurs.
• If the system does not restart, suspect the system board.
Unusual smell
Complete the following steps until the problem is solved.
1. An unusual smell might be coming from newly installed equipment.
2. If the problem remains, contact Lenovo Support.
Server seems to be running hot
Complete the following steps until the problem is solved.
Multiple compute nodes or chassis:
1. Make sure that the room temperature is within the specified range (see
2. Make sure that the fans are installed correctly.
3. Update the UEFI and XCC to the latest versions.
4. Make sure that the fillers in the server are installed correctly (see
procedures" on page 37
5. Use the IPMI command to ramp up the fan speed to the full fan speed to see whether the issue can be
resolved.
Note: The IPMI raw command should only be used by trained technician and the each system has its
own specific PMI raw command.
6. Check the management processor event log for rising temperature events. If there are no events, the
compute node is running within normal operating temperatures. Note that you can expect some
variation in temperature.
Cannot enter legacy mode after installing a new adapter
Complete the following procedure to solve the problem.
1. Go to UEFI Setup ➙ Devices and I/O Ports ➙ Set Option ROM Execution Order.
2. Move the operation system installed to the top of the list.
3. Select Save.
4. Reboot the system and auto boot to operation system.
Cracked parts or cracked chassis
Contact Lenovo Support.

Optional-device problems

Use this information to solve problems related to optional devices.
.) Then, click System Settings ➙ Recovery and RAS ➙ POST Attempts ➙
for detailed installation procedures).
"Specifications" on page 4
"Specifications" on page
Chapter 5 "Hardware replacement
Chapter 8
for the minimally
4).
.
Problem determination
203