Lenovo ThinkEdge SE350 V2 User Manual page 10

the server system board. Some of the features that are unique to the Lenovo XClarity Controller are
enhanced performance, higher-resolution remote video, and expanded security options.
ThinkEdge SE350 V2 supports Lenovo XClarity Controller 2 (XCC2). For additional information about
Lenovo XClarity Controller 2 (XCC2), refer to
• UEFI-compliant server firmware
Lenovo ThinkEdge firmware is Unified Extensible Firmware Interface (UEFI) compliant. UEFI replaces
BIOS and defines a standard interface between the operating system, platform firmware, and external
devices.
Lenovo ThinkEdge servers are capable of booting UEFI-compliant operating systems, BIOS-based
operating systems, and BIOS-based adapters as well as UEFI-compliant adapters.
Note: The server does not support Disk Operating System (DOS).
• Large system-memory capacity
The server supports synchronous dynamic random-access memory (SDRAM) registered dual inline
memory modules (DIMMs) with error correcting code (ECC). For more information about the specific types
and maximum amount of memory, see
• Integrated network support
ThinkEdge SE350 V2 provides network through either of the two following options of I/O module boards.
1. 10/25GbE I/O module board: with four 10/25GbE SFP28 connectors and two 2.5GbE RJ-45
connectors
2. 1GbE I/O module board: with four 1GbE RJ-45 connectors and two 2.5GbE RJ-45 connectors
• Large data-storage capacity and hot-swap capability
ThinkEdge SE350 V2 supports up to two 15mm NVMe hot-swap drives or four 7mm SATA or NVMe hot-
swap drives. With the hot-swap feature, the solid state drives can be added, removed, or replaced without
turning off the server.
• Mobile access to Lenovo Service Information website
ThinkEdge SE350 V2 provides a QR code on the system service label, which is on the cover of the server
and can be scanned using a QR code reader and scanner with a mobile device to get quick access to the
Lenovo Service Information website. The Lenovo Service Information website provides additional
information for parts installation, replacement videos, and error codes for server support.
• Active Energy Manager
Lenovo XClarity Energy Manager is a power and temperature management solution for data centers.
Through Lenovo XClarity Energy Manager, the power consumption and temperature of Converged,
NeXtScale, System x, and ThinkServer servers can be monitored and managed, and energy efficiency can
be improved.
• Redundant networking connection
The Lenovo XClarity Controller provides failover capability to a redundant Ethernet connection with the
applicable application installed. If a problem occurs with the primary Ethernet connection, all Ethernet
traffic that is associated with the primary connection is automatically switched to the optional redundant
Ethernet connection. If the applicable device drivers are installed, this switching occurs without data loss
and without user intervention.
• Redundant cooling and optional power capabilities
ThinkEdge SE350 V2 supports a maximum of two 300-watt hot-swap power adapters or direct DC power
source and three internal fans, which provide redundancy for a typical configuration. The redundant
cooling by the fans in the server enables continued operation if one of the fans fails.
ThinkEdge SE350 V2 User Guide
2
https://pubs.lenovo.com/lxcc-overview/
"Technical specifications" on page
.
4.