Features - ST STM32L562E-DK User Manual

1

Features

• STM32L562QEI6Q microcontroller featuring 512 Kbytes of flash memory and 256 Kbytes of SRAM in a
BGA132 package
• 1.54" 240 × 240 pixel-262K color TFT-LCD module with a parallel interface and touch‑control panel
• USB Type-C
• On-board energy meter: 300 nA to 150 mA measurement range with a dedicated USB interface
• SAI audio codec
• MEMS digital microphones
• 512-Mbit Octo‑SPI flash memory
• Bluetooth
• iNEMO 3D accelerometer and 3D gyroscope
• Two user LEDs
• User and reset push-buttons
• Board connectors:
– USB Type-C
– microSD
– Stereo headset jack including analog microphone input
– JTAG debugger
– DPM dynamic-power measurement interface for external device
– STMod+ expansion connector with fanout expansion board for Wi‑Fi
compatible connectors
– Pmod
– Audio MEMS daughterboard expansion connector
– ARDUINO
• Flexible power-supply options: ST-LINK USB V
• On-board STLINK-V3E debugger/programmer with USB re-enumeration capability: mass storage, Virtual
COM port, and debug port
• Comprehensive free software libraries and examples available with the
• Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded
Workbench
Note: Arm and TrustZone are registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
UM2617 - Rev 7
®
Sink device FS
®
Low Energy V4.1 module
®
™
card
™
expansion connector
®
Uno V3 expansion connector
®
, MDK-ARM, and STM32CubeIDE
®
, USB connector, or external sources
BUS
STM32CubeL5
UM2617
Features
™
, Grove, and mikroBUS
MCU Package
page 2/64