4-6.4 Advanced Chipset Features - SOLTEK KT400-R Manual

4-6.4 Advanced Chipset Features

Advanced Chipset Features is used to modify the values of chipset
buffers. These buffers control the system options.
Run the Advanced Chipset Features as follows:
1. Choose "Advanced Chipset Features" from the Main Menu and a
list of option will appear:
AMIBIOS NEW SETUP UTILITY - VERSION 3.31a
Advanced Chipset Features
DRAM Timing
Configure SDRAM timing by SPD
SDRAM Frequency
SDRAM CAS# Latency
SDRAM Bank Interleave
SDRAM Burst Length
SDRAM Command Rate
Fast Command
AGP Mode
AGP Fast Write
AGP Aperture Size
AGP Master 1 W/S Write
AGP Master 1 W/S Read
AGP Read Synchronization
APIC Interrupt Mode
USB Controller
USB 1.1 Device Legacy Support
USB 1.1 Port 64/60 Emulation
F1: Help : Select Item
Esc: Previous Menu
2. Use one of the arrow keys to move between options and modify the
selected options by using PgUp / PgDn / + / - keys. An explanation
of the <F> keys follows:
<F1>: "Help" gives options available for each item.
<F9>: Setup BIOS default values.
<F10>: Save and Exit Setup.
3. Press <ESC> to return to the Main Menu when you finish setting up
all items. The following item descriptions are provided as a quick
guide to your setup.
Enabled
Auto
2.5
Disabled
4 QW
2T
Normal
8X
Disabled
64MB
Disabled
Disabled
Disabled
Disabled
6 USB Ports
Disabled
Disabled
+/- : Change Values
Enter: Select Sub-Menu
69
Chapter 4 BIOS Setup
Setup Help
F9: Setup Defaults
F10: Save and Exit