Introduction; Safety; Safety-Alert Symbol; Understanding Signal Words - Chore-Time 108 Installation And Operator's Manual

Bin Fill Cap Kit

Introduction

Safety

Caution, Warning and Danger Decals have been placed on the equipment to warn of potentially dangerous situations. Care
should be taken to keep this information intact and easy to read at all times. Replace missing or damaged safety decals
immediately.
Safety–Alert Symbol
This is a safety–alert symbol. When you see this symbol on your equipment, be alert to the potential for
personal injury. This equipment is designed to be installed and operated as safely as possible...however,
hazards do exist.

Understanding Signal Words

Signal words are used in conjunction with the safety–alert symbol to identify the severity of the warning.
DANGER indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious
injury.
WARNING indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious
injury.
CAUTION indicates a hazardous situation which, if not avoided, MAY result in minor or moderate injury.

Follow Safety Instructions

Carefully read all safety messages in this manual and on your equipment safety signs. Follow recommended precautions and
safe operating practices.
Keep safety signs in good condition. Replace missing or damaged safety signs.

Decal Descriptions

DANGER: Moving Auger
This decal is placed on the End Cap Weldment and Clean-out cover. Severe
personal injury will result, if the electrical power is not disconnected, prior to
servicing the equipment.
DANGER: Electrical Hazard
Disconnect electrical power before inspecting or servicing equipment unless
maintenance instructions specifically state otherwise.
Ground all electrical equipment for safety.
All electrical wiring must be done by a qualified electrician in accordance with local and
national electric codes.
Ground all non-current carrying metal parts to guard against electrical shock.
Electrical disconnects and over current protection are not supplied with the equipment.
DANGER: Springing Auger
Use caution when working with Auger. Springing Auger may cause personal injury.
Attention: Read the Manual
See the manual for detailed installation instructions.
MA1038D
Introduction
Manboot 3/98
3