Ending Calls; Redialing Numbers - Polycom VVX 1500 User Manual

Note

Ending Calls

Redialing Numbers

To answer an incoming call on a shared line:
1. Tap the Line Key with the status indicator that is flashing green, or tap
the Answer soft key.
2. Tap the Hold soft key or press
If you wait too long, the incoming call window is minimized and placed in the
inactive call group (along the bottom of the touch screen), and the active call
reappears in the window in the center of the touch screen. To answer the incoming
call, tap the Line Key with the status indicator that is flashing green, or tap the
Hold soft key to place the active call on hold, and then tap the Answer soft key.
Anyone on another phone configured to use the same shared line may take the
call by tapping the Line Key associated with the held call (represented by a
flashing red status indicator).
To end a call:
Do one of the following:
>>
— Tap the End Call soft key.
— If you are in handset mode, replace the handset.
— If you are in speakerphone mode, press
— If you are in headset mode, press
Redial a number by pressing
To redial the last call placed from your phone:
Press .
>>
A call to your last placed call is attempted.
Using the Basic Features of Your Phone
.
.
.
, or accessing your placed calls list.
3 - 15