Table of Contents
Advertisement
Available languages
Available languages
EN - 12
FAQ
Q: Why the data transmission indicator is off?
A: 1) Please check whether all equipment is powered on and the LC
fiber optic cable is connected properly.
2) Try to change another fiber optic cable to connect.
Q: Why is the data transmission indicator has been flashing
slowly?
A: 1) Please check whether there is HDMI signal input for the TX.
2) Try to connect the signal source directly to the display device,
or change the signal source and HDMI cable and test again.
Q: Why is the output image unstable?
A: 1) Check whether the length of the LC single-mode fiber optic
cable connected from TX to RX is within 40 kilometers.
2) The length of HDMI cable is recommended to be ≤5 meters.
3) Press the "reset" button on TX and RX to restart and reconnect.
WWW.TECHLY.COM
HDMI OPTICAL
IT - 12
FIBER EXTENDER
Advertisement
Table of Contents
Need help?
Do you have a question about the EXT-EF3000 and is the answer not in the manual?
Questions and answers