Supermicro SuperServer SYS-110D-4C-FRAN8TP User Manual page 62

BMC Dedicated LAN Enable/Disable
Use JBM2 to enable or disable the dedicated BMC LAN port. Refer to the table below for
jumper settings.
BMC Share LAN Enable/Disable
Set the JBM1 jumper to enabled to share i350 LAN with BMC.
10G BASE-T LAN Enable/Disable
Use JPTG1 to enable or disable LAN5/6. The default setting is Enabled.
LAN Port Enable/Disable
Use JPL1 to enable or disable LAN1 - LAN4. The default setting is Enabled.
BMC Dedicated LAN
Enable/Disable
Jumper Settings
Jumper Setting Definition
Pins 1-2 (Open) Enabled (Default)
Pins 1-2 (Short) Disabled
BMC Share LAN Enable/Disable
Jumper Settings
Jumper Setting Definition
Pins 1-2 (Open) Enabled (Default)
Pins 1-2 (Short) Disabled
10G BASE-T LAN Enable/Disable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled
Pins 2-3 Disabled
LAN Port Enable/Disable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
62
Chapter 4: Motherboard Connections