Table of Contents
Advertisement
Separator fluid spraying system (o)
Used to spray the parts coming into con-
tact with asphalt with a separator emulsion.
- Connect the spray hose (1) with the
hand piece (2).
m
Only switch on the spraying system
when the diesel engine is running; other-
wise, the battery will be discharged.
Switch off after use.
- Pull the hose out of the device until a
click is audible. When released, the
hose automatically engages here.
The hose is automatically retracted
into the guide after pulling and dis-
charging again.
- Actuate button (3) to activate and de-
activate the pump.
- The indicator lamp (4) lights up when
the emulsion pump is running.
- Actuate the manual valve (5) to spray.
f
Do not spray into open flame or on hot
surface! Danger of explosion!
The spraying system is fed by a canister
A
(6) at the vehicle step. Check the level at
the sight tube (7).
Unscrew the tank cover (8) to fill
the tank.
f
Refill the canister only while the vehicle
is stationary!
- If the system is not in use, place the spray lance in the holder (9) provided.
D 30.18 22
3
4
9
2
1
5
8
6
7
Advertisement
Table of Contents
