Table of Contents
Advertisement
7
Towing
f
Heed all regulations and apply all safety measures applicable for towing heavy con-
struction machines.
The towing vehicle must be capable of securing the paver finisher, even on slopes.
m
Use only approved tow bars!
If necessary, remove any attachments and accessories from the paver finisher and
the screed until the basic width has been attained.
A hand pump (1) is located in the engine compartment (left side); it must be actuated
A
to be able to tow the machine.
Pressure for releasing the traction system brakes is built up with the hand pump.
- Release lock nut (2), screw threaded
dowel (3) into pump as far as possible
and secure with lock nut.
Insert the pump lever of the roof pump in
A
the opening (4).
- Actuate lever of hand pump until suffi-
cient pressure has been built up
and traction
been released.
m
On completion of the towing process, re-
store the initial status.
m
Only release the traction system brakes
when the machine is sufficiently secured
against
accidental
already properly connected to the tow-
ing vehicle.
system
brakes
have
rolling
or
1
2
is
4
3
C 12.18 21
Advertisement
Table of Contents
