Separator Fluid Spraying System (O) - Fayat Group DYNAPAC SD2550C Operating Instructions Manual

Separator fluid spraying system (o)

Used to spray the parts coming into
contact with asphalt with a separator
emulsion.
- Connect the spray hose (1) with quick-
action coupling (2).
m Only switch on the spraying system
when the diesel engine is running; other-
wise, the battery will be discharged.
Switch off after use.
A permanently installed hose package (3)
A
for the spraying system is available as
an option.
- Pull the hose out of the device until a
click is audible. When released, the
hose automatically engages here. The
hose is automatically retracted into the
guide after pulling and discharging
again.
- Actuate button (4) to activate and de-
activate the pump.
- The indicator lamp (5) lights up when
the emulsion pump is running.
- Actuate the manual valve (6) to spray.
f Do not spray into open flame or on hot
surface. Danger of explosion!
The spraying system is fed by a canister
A
(7) at the vehicle step.
Refill the canister only while the vehicle
f
is stationary!
- If the system is not in use, place the
spray lance (8) in the provided
holder (9).
- If the spray hose is not in use, it can be
placed in its bracket (10).
D 30 26
10
2
8
9
1
3
8
9
6
7
4
5
6
9
7
4
5