Table of Contents
Advertisement
Push roller crossbar, adjustable
1
180°
2
For adaptation to various truck design types, the push roller crossbar (1) can be shift-
ed to two positions.
The adjustment travel is 60mm.
A
- Close the hopper halves to lift the hopper flap (o).
- After removing the bolts (3), remove the locking plate (2) on the lower side of the
crossbar.
- Remove insert plate (4).
- Remove bolt (5).
- Move the push roller crossbar as far as it will go to the front / rear position.
Shift the push roller crossbar at the towing eye or use a suitable assembly lever in its
A
guide (left and right) to push it into the corresponding position.
- Turn the bolt (5) 180° and reinsert in the front or rear position
- Turn the insert plate (5) 180° and reinsert into the groove in the front or
rear position.
- Properly reinstall the locking plate (2) with bolts (3).
E 10.18 6
4
180°
3
4
Advertisement
Table of Contents
