Table of Contents
Advertisement
Auger box (2)
Check grease fill
To check the grease fill:
- Remove side cover (A)
No reduction in the quality and quantity
A
of the grease fill is normally expected.
However, the grease fill must always
be replaced if there is a considerable
change
in
have formed.
When grease is present in the correct
A
quantity and quality, a film of grease ad-
heres to the full length of both chains (B).
- Top up with grease if necessary.
- Reinstall cover (A).
Change grease
The grease should be changed regularly when proceeding with wear-related change
A
of the chains and chain sprockets.
- After dismantling the worn parts, clean the auger box on the inside.
- Once all parts have been mounted, fill with new grease, then fit cover (A).
Your Dynapac customer service will be happy to provide support during maintenance,
A
repair and the replacement of wearing parts!
colour
or
any
lumps
A
B
F 40.18 7
Advertisement
Table of Contents
