2.2
Auger width extension and material shaft with protective cover
(optional equipment)
6
To fit auger extensions, an additional auger segment (1) is fitted to the auger shaft.
Assembly:
- Remove outermost screw connection (2) from the basic auger.
- Remove plug (3).
- Fit the auger extension (1) to the corresponding side.
- Fit screw connection (2).
- Fit plugs (3) to the auger extension.
The relevant material shaft must be fitted to each auger extension.
4
2
5
1
4
6
3
E 10.18 5