Replacing/dismantling and installing the wheels
f
The jack must be rated for at least 10t.
f
The jack is only intended to lift a load and not as a support. Work should only be per-
formed to and under raised vehicles when they have been secured and correctly sup-
ported to prevent them from tilling over and rolling or sliding away.
f
The jack must only be used on smooth, firm ground.
Roller-type jacks must not be moved when under load.
f
Chocks or supporting beams positioned so that they cannot be shifted or tilted must
f
be adequately dimensioned and be able to take the corresponding weight.
f
There must not be anyone on the vehicle while it is being lifted.
F 71.18 7