Table of Contents
Advertisement
5
Transportation
m
Reduce the paver finisher and the screed to their basic widths; also remove any at-
tached side plates.
5.1
Preparations
- Prepare the paver finisher for transportation (see chapter D).
- Remove all overlaying or loose parts from finisher and screed (see also Screed op-
erating instructions). Store these parts in a safe place.
f
When the screed is operated with the optional gas heat-
ing system:
- Remove the gas bottle for the screed heater system:
- Close main shut-off valve and bottle valve.
- Turn off the valves on the bottles and remove the gas
bottles from the holder.
- Transport the gas bottle on a second vehicle, adhering to all safety regulations.
C 12.18 15
Advertisement
Table of Contents
