Table of Contents
Advertisement
11.6 Configure Port
You can configure different types of ports to enable relevant functions.
Steps
1. Go to System → Network → Advanced → More Settings.
2. Configure port settings as needed.
Alarm Host IP/Port
With a remote alarm host configured, the device will send the alarm event or exception
message to the host when an alarm is triggered. The remote alarm host must have the client
management system (CMS) software installed. The alarm host IP refers to the IP address of
the remote PC on which the CMS software is installed, and the alarm host port (7200 by
default) must be the same as the alarm monitoring port configured in the software.
Server Port
Network Video Recorder User Manual
Figure 11-5 Setting Virtual Server Item
Figure 11-6 Port Settings
99
Advertisement
Table of Contents
