Table of Contents
Advertisement
2. Enable SNMP v2 or SNMP v3 as your desire.
3. Set related parameters.
4. Set SNMP Port.
5. Click Save.
11.4 Configure Email
The system can be configured to send an e-mail notification to all designated users when a
specified event occurs such as when an alarm or motion event is detected, or the administrator
password is changed, etc.
Before You Start
The device must be connected to a local area network (LAN) that contains an SMTP mail server.
The network must also be connected to either an intranet or the Internet depending on the
location of the e-mail accounts to which you want to send notifications.
Steps
1. Go to System → Network → Advanced → Email.
2. Configure the email settings.
Enable Server Authentication
Check to enable the function if the SMTP server requires user authentication and enter the
user name and password accordingly.
SMTP Server
The IP address of SMTP Server or host name (e.g., smtp.263xmail.com).
SMTP Port
Network Video Recorder User Manual
Figure 11-3 Email Settings
96
Advertisement
Table of Contents
