Vehicle Detection; Multi-Target-Type Detection - HIKVISION DS-9600NI-I8B Series User Manual

6.2.9 Vehicle Detection

Vehicle detection, available in the road traffic monitoring, is tend to detect the passed vehicle on
the road, and capture its license plate at the same time.
Steps
1. Go to Smart Analysis → Smart Event Settings → Vehicle Detection.
2. Select a camera.
3. Click Vehicle.
4. Check Enable Vehicle Detection.
5. Optional: Check Save VCA Picture to save the captured vehicle detection pictures.
6. Configure rules, including Area Settings, Picture, Overlay Content, and Blocklist and Allowlist.
Area Settings
Up to 4 lanes are selectable.
Blocklist and Allowlist
You can export the file first to see its format, and edit it and import it to the device.
7. Click Apply.
Note
Refer to Network Camera User Manual for detailed instructions for the vehicle detection.
8. Set the arming schedule. Refer to Configure Arming Schedule.
9. Set the linkage actions. Refer to Configure Linkage Actions.

6.2.10 Multi-Target-Type Detection

Multi-target-type detection enables the device to detect the faces, human bodies and vehicles
simultaneously in a scene.
Steps
1. Go to Smart Analysis → Smart Event Settings → Video Structuralization.
2. Select a camera.
3. Check Enable Multi-Target-Type Detection.
4. Optional: Check Save VCA Picture to save the captured intrusion detection pictures.
5. Set detection area.
1) Click Draw Area.
2) Adjust the red frame on the image to draw the detection area. It is full screen by default.
3) Click Stop Drawing.
6. Set the arming schedule. Refer to Configure Arming Schedule.
7. Set linkage actions. Refer to Configure Linkage Actions.
8. Click Apply.
Network Video Recorder User Manual
63