Configure Queue Management; Target Detection - HIKVISION LTN07128/256 User Manual

7. Click Apply.

6.2.20 Configure Queue Management

After connecting with queue management camera, you can set the arming schedule and linkage
action of queue management.
Before You Start
Ensure the recorder have connected with queue management camera.
Steps
1. Go to Smart Analysis → Smart Event Settings → Other Events.
2. Select a queue management camera.
3. Optional: Check Save VCA Picture to save the captured pictures of detection.
4. Set the arming schedule. Refer to Chapter Configure Arming Schedule for details.
5. Set the linkage actions. Refer to Chapter Configure Linkage Actions for details.
6. Click Apply.

6.2.21 Target Detection

In live view mode, the target detection function can achieve smart detection, facial detection,
vehicle detection, and human body detection during the last 5 seconds and the following 10
seconds.
Steps
1. In Live View mode, click Target Detection to enter the target detection interface.
2. Select different detection types: smart detection ( ), vehicle detection (
( ), and human body detection ( ).
Note
For thermal cameras, the temperature measurement event is in mart detection ( ), the face
capture and facial temperature measurement are in facial detection ( ).
3. Select the historical analysis (
Note
The smart analysis results of the detection are displayed in the list. Click a result in list to play
the related video.
4. Optional: You can select channels that require picture capture. The unselected channels will not
capture picture.
1) Click at the left bottom of live view interface.
2) Select channel(s), the checked channel(s) will capture picture. All channels are selected as
default.
Network Video Recorder User Manual
) or real-time analysis ( ) to obtain the results.
71
), facial detection