Multi-Target-Type Detection; Vehicle Detection - HIKVISION DeepinMind Series User Manual

Add Search Result as Sample Picture
You can add searched human body pictures as sample pictures. And then search human body
pictures by the sample pictures.
Steps
1. Search human body pictures.
2. In search result interface, click to select a picture and click Add to Sample.
3. Return to search condition settings interface, the selected sample will be listed.

6.6 Multi-Target-Type Detection

Multi-target-type detection enables the device to detect the faces, human bodies and vehicles
simultaneously in a scene.
Before You Start
Go to Smart Analysis → Engine Settings → Engine Configuration to configure at least one engine
usage as Video Structuralization-Real-Time. Refer to Engine Configuration for details.
Steps
1. Go to Smart Analysis → Smart Event Settings → Video Structuralization .
2. Select a camera.
3. Check Enable Multi-Target-Type Detection.
4. Optional: Check Save VCA Picture to save the captured intrusion detection pictures.
5. Optional: Check Enable NVR Smart Analysis. The device will analyze the video, cameras only
transmit video stream.
6. Set detection area.
1) Click Draw Area.
2) Adjust the red frame on the image to draw the detection area. It is full screen by default.
3) Click Stop Drawing.
7. Optional: Set Capture Quality. The captured picture will be stored to the device, high quality
brings higher resolution, but it takes larger storage space. Picture quality will not affect
detection accuracy.
8. Set the arming schedule. Refer to Configure Arming Schedule .
9. Set the linkage method. Refer to Configure Linkage Actions .
10. Click Apply.

6.7 Vehicle Detection

Vehicle detection is available for the road traffic monitoring. In vehicle detection, the passed
vehicle can be detected and the picture of its license plate can be captured. You can send alarm
signal to notify the surveillance center and upload the captured picture to FTP server.
Network Video Recorder User Manual
96