Face Capture - HIKVISION LTN07128/256 User Manual

detected.
Before You Start
Ensure your thermography camera supports this function, and it is properly configured.
Steps
1. Go to System → Event → Smart Event.
2. Select the optical channel of thermography camera.
3. Click Face Capture.
4. Optional: Check Save VCA Picture to save the captured pictures of face detection.
5. Set the arming schedule. Refer to Configure Arming Schedule.
6. Set linkage actions. Refer to Configure Linkage Actions. If you only requires to implement
linkage actions when the thermography camera detects abnormal temperature. Click More, and
check Abnormal Body Temperature.
Note
The abnormal temperature is detected and defined by the thermography camera.
7. Click Audio Alert, and check Normal Temperature or Abnormal Temperature to enable desired
audio alert when normal or abnormal temperature is detected by the camera.
8. Click Apply.
What to do next
● You can check
● You can go to File Management → Smart Search → Search by Appearance to search detection
results.

6.2.2 Face Capture

The face capture detects and captures faces appearing in the surveillance scene. Linkage actions
can be triggered when a human face is detected.
Steps
1. Go to Smart Analysis → Smart Event Settings → Facial Recognition.
2. Click Face Capture.
Network Video Recorder User Manual
Figure 6-4 Audio Alert
of Target Detection in live view to view detection results.
53