2) Scan the QR code to read the service terms and privacy statement.
3) Check The LTS Connect service will require internet access. Please read Service Terms and
Privacy Statement before enabling the service if you agree with the service terms and
privacy statement.
4) Click OK.
Note
● LTS Connect is disabled by default.
● The verification code is empty by default. It must contain 6 to 12 letters or numbers, and it is
case sensitive.
3. Optional: Check Custom and enter Server Address as your desire.
4. Optional: Check Enable Stream Encryption, then verification code is required for remote access
and live view.
5. Bind your device with a LTS Connect account.
1) Use a smart phone to scan the QR code on the device to download LTS Connect.
2) Use LTS Connect to scan the device QR, and bind the device.
Note
If the device is already bound with an account, you can click Unbind to unbind with the
current account.
6. Click Apply.
What to do next
You can access and manage your video recorder through LTS Connect app or
dev.guardingvision.com.
1.5.2 Configure ISUP
SDK is based on Intelligent Security Uplink Protocol (ISUP). It provides APIs, library files, and
commands for the third-party platform to access devices such as NVRs, speed domes, DVRs,
network cameras, mobile NVRs, mobile devices, decoding devices, etc. With this protocol, the
third-party platform can realize functions like live view, playback, two-way audio, PTZ control, etc.
Steps
1. Go to System → Network → Advanced → Platform Access.
Network Video Recorder User Manual
12