Table of Contents
Advertisement
ColorCue 2 AIR
Delete a Color
To delete a color:
Press one or more FIXTURES buttons (26)–(31) to select the fixture(s) for which you want to delete a
color. You can select multiple fixtures at the same time.
Press and hold down the RECORD button (36) for 3 seconds to enter programming mode. The LED on
the button starts blinking.
Press the USER COLORS button (22). The LED on the button lights up.
Press the DELETE button (37) and the COLORS/CHASES buttons (1)–(20) at the same time, to delete
the color. The LED on the COLORS/CHASES button (1)–(20) blinks 3 times.
Press and hold down the RECORD button (36) for 3 seconds to exit the mode. The LED on the button
turns off.
Record a Chase Step
To record a chase step:
Press one or more FIXTURES buttons (26)–(31) to select the fixture(s) for which you want to record a
chase. You can select multiple fixtures at the same time.
Note:
The chase is recorded on the DMX channel corresponding to the LED fixture and cannot be selected
on other channels/fixture. If you want to have the same chase recorded for all fixtures, you need to
select all 6 fixtures in step 1 above.
Press and hold down the RECORD button (36) for 3 seconds to enter programming mode. The LED on
the button starts blinking.
Press the USER CHASES button (24) to enter User Chase mode. The LED on the button lights up.
Press one of the COLORS/CHASES buttons (1)–(20) to which you want to assign the chase. The LED on
the button lights up.
Note:
Press a COLORS/CHASES button (1)–(20) to make sure that the button is free. If the LED on the button lights
up, the button is not free.
You can adjust the color in one of the 3 ways:
●
Manual setup:
●
Preset color:
●
User color:
Press the RECORD button (36) to save the setting. The LEDs on all buttons blink 3 times.
Repeat steps 4–5 to program all steps in a chase. One chase can have up to 99 steps.
Press and hold down the RECORD button (36) for 3 seconds to exit programming mode. The LED on
the button turns off.
Note:
It is not possible to record strobe, speed, fade or direction in a chase. Adjust these functions during the
playback of a chase.
Product code: 50708
See 6.3.1. Manual Mode on page 20 to set up the color manually
See 6.3.2.1. Preset Colors Mode on page 20 to select one of the 20 preset colors
See 6.3.2.2. User Colors Mode on page 21 to select one of the user-recorded colors
26
Advertisement
Table of Contents
