Table of Contents
Advertisement
ColorCue 2 AIR
Operating Functions
Strobe
You can add strobe effect at any time during playback of a scene or a chase.
Turn the AMBER/STROBE control (N) to add strobe effect. The adjustment range is from low to high
frequency.
Note:
The strobe effect cannot be recorded in a scene or a chase.
Blackout
You can activate the blackout function at any time during playback of a scene or a chase.
Press the BLACKOUT button (32) to black out the light output of all fixtures. The LED on the button starts
blinking.
Chase Playback
There are 3 playback options.
Press the PLAYBACK button (35) repeatedly until the LED on the button lights up in the color
corresponding to the playback option.
●
Auto playback:
●
Step playback (manual):
●
Sound-controlled playback: The LED on the button lights up blue. The chase reacts to the beat of
You can also adjust the following parameters during playback of the chase:
●
Chase direction: Turn the RED/Direction control (J) to change the direction of the chase. In OFF
●
Speed:
●
Fade:
●
Strobe:
Product code: 50708
The LED on the button lights up red. Turn the GREEN/SPEED control (K) to
decrease/increase the speed. The chase plays automatically. If the
GREEN/SPEED control (K) and BLUE/FADE control (L) are in OFF position,
the chase does not play.
Turn the GREEN/SPEED (K) and BLUE/FADE (L) controls to fetch the zero
position. When the zero position is fetched, you can further adjust the
speed and the fade. If you switch between two chases or between a
chase and a color, it is not necessary to fetch the zero position again.
The LED on the button lights up green. Press the STEP+ (33) or the
STEP- (34) buttons to manually select a step from the chase step
sequence.
the music. Turn the WHITE/SOUND control (M) to adjust the sensitivity of
the built-in microphone.
position (<) the chase plays backwards. In FULL position (>) the chase plays
forwards.
Turn the GREEN/SPEED control (K) to decrease/increase the speed of the chase.
Turn the BLUE/FADE control (L) to decrease/increase the fade time between the
steps.
Fade time cannot be adjusted during manual playback and sound-controlled
playback.
Turn the AMBER/STROBE control (N) to add strobe effect to the chase. The
adjustment range is from low to high frequency.
24
Advertisement
Table of Contents
