Table of Contents
Advertisement
ColorCue 2 AIR
Connecting to Power Supply
Attention
Incorrect handling of the AC power adapter may result in hazardous situations
This device is delivered with an AC power adapter. Incorrect handling of the AC power adapter may
result in hazardous situations.
Connect the device to the socket-outlet with the delivered AC power adapter. Use only the AC power
adapter delivered with the device.
Switching On
The device has a power switch.
●
Press the power switch (Z) in ON position to switch on the ColorCue 2 AIR.
●
Press the power switch (Z) in OFF position to switch off the ColorCue 2 AIR.
Linking (Wireless DMX)
You can link the device with lighting fixtures that have a wireless DMX receiver.
Before linking, make sure that the lighting fixtures are not linked with any other transmitter. Otherwise, it
will not be possible to link the lighting fixtures.
The device has a wireless link/unlink button (T).
●
To link the devices, press the wireless link/unlink button (T) once.
●
To unlink the devices, press and hold down the wireless link/unlink button (T) for 3 seconds.
The LED indicator on the wireless link/unlink button (T) shows the wireless DMX status:
LED color
LED behavior
Red
Flashing
Red, Blue
Flashing
Blue
Lights up
Note:
The LED indicator on the wireless link/unlink button (T) does not show if the device is linked to any fixture.
Product code: 50708
Status
Unlinked
Linking in progress
The device is sending wireless DMX signal
17
Advertisement
Table of Contents
