Table of Contents
Advertisement
ColorCue 2 AIR
Wireless DMX Setup
To link the device to multiple lighting fixtures in a wireless DMX setup, follow the steps below:
Power the device. See 5.4. Connecting to Power Supply on page 17.
Switch on the device. See 5.5. Switching On on page 17.
Put the antenna (S) in upright position.
Power the lighting fixtures.
Activate wireless DMX on the lighting fixtures.
Set the DMX starting address of the lighting fixtures to 001.
Link the device with the lighting fixtures. See 5.6. Linking (Wireless DMX) on page 17.
Fig. 08
Product code: 50708
16
Advertisement
Table of Contents
