Iii. Hardware Installation; Iii-1. Connecting The Access Point To A Router Or Poe Switch - Edimax EW-7479CAP User Manual

III. Hardware Installation

III-1. Connecting the access point to a router or PoE switch
1.
If you need to, remove the cap from the underside of the access point. This
creates extra space for your cables to pass through.
2.
Connect a router or PoE switch to the access point's LAN port using an
Ethernet cable.
3.
If you are using a router, then connect the power adapter to the access
point's 12V DC port and plug the power adapter into a power supply.
4.
If you are using a PoE (Power over
Ethernet) switch then it is not
necessary to use the included
power adapter, the access point will
be powered by the PoE switch.
12