Function And Setting Of Each Switch - Indoor Unit (Compact Wall Mounted Type) - Fujitsu Airstage V series Service Manual

2-3-2 Indoor Unit ( COMPACT WALL MOUNTED TYPE )
* COMFORT MODEL
SW1 setting
Fan speed setting switch (Never change at the site)
The fan speed corresponding to each model is set with the switch.
AS*E07
SW1-1
SW1-2
DIP-SW 1-3 setting forbidden
SW 1-3
External input select edge / pulse
This switch is used to select the format of external input command as shown in the table below.
SW1-4
OFF
ON
SW2 setting
Model code setting switch (Never change at the site)
The model code information corresponding to each model is provided with the switch.
AS*E07
SW2-1
SW2-2
DIP-SW 2-3 setting forbidden
SW 2-3
Auto restart validity / invalidity.
The auto restart function becomes validity by changing the switch position from OFF to ON.
AUTO RESTART SETTING
SW2-4
OFF
ON
AS*E09 AS*E12
OFF ON OFF
OFF OFF ON
( Factory setting)
OFF
( Factory setting)
External input select
Edge
Pulse
AS*E09 AS*E12
OFF ON OFF
OFF OFF ON
( Factory setting)
OFF
(
Auto restart
Invalidity
Validity
AS*E14
ON
ON
AS*E14
ON
ON
Factory setting)
02-19