TESTO 300 LL NEXT LEVEL Instruction Manual page 81

Display Measurement parameter
CO2 Carbon dioxide
qAnet Flue gas loss without consideration of the calorific value range
Effn Efficiency without consideration of the heat value range
qAgr. Flue gas loss with consideration of the calorific value range
Effg
Efficiency with consideration of the calorific value range
Draught
Flue draught
ΔP Differential pressure
CO Carbon monoxide
uCO Undiluted carbon monoxide
NO Nitrogen monoxide
NOx
Nitrogen oxides
λ
Fuel-air ratio
AmbCO Ambient carbon monoxide
O2ref Oxygen reference
ΔT Differential temperature
Dew Pt Flue gas dewpoint temperature
Smoke 1
Smoke 2
Smoke 3
Smokenum
ber Ø
Only those measurement parameters and units that are enabled in the
reading display appear in the reading display, in the saved
measurement protocols and on the report printouts.
The settings only apply to the measurement type currently enabled.
9 Performing the measurement
81