E-Mail - TESTO 300 LL NEXT LEVEL Instruction Manual

8.2.11 E-mail

Setting up an e-mail account
An e-mail account has to be set up in order to be able to send reports
as e-mails. A Wireless LAN connection must be available to set the
account up.
1
Call up function:
2
Enter e-mail address.
3
Enter password.
4
Set account options, such as synchronization interval
5
Entry of account name (optional) and name which appears with the
sent e-mails.

The inbox of the e-mail account is opened.
If the system does not accept the e-mail address and password
combination, but you are certain it is correct, check the following
possible solutions:
Open e-mail client, e.g. gmail, on a PC and check e-mail reception.
•
Your provider may have sent you a security e-mail that you need to
acknowledge before the e-mail account can be accepted on the
testo 300 NEXT LEVEL.
Enable IMAP account
•
To do this, call up your e-mail account on the PC. You will find the
setting for the common e-mail providers, e.g. gmx, under settings -
POP/IMAP. Account-specific information about the enabling of the
IMAP account is supplied by the relevant provider. Find out about
this from the relevant provider or on the Internet.
Manual set-up of the e-mail account
•
1.
2.
3.
4.
5.
6.
| E-Mail
Call up function:
Enter e-mail address.
Select Manual set-up
Private account type (IMAP)
Select
Enter password.
Enter/change server, port and security type.
This information is e-mail account specific and is supplied
by your e-mail account provider. Find out about this from
your account provider or on the Internet.
| E-Mail.
.
(recommended).
8 Using the product
49