Setting And Calibration - Toshiba LF620 B Series Instruction Manual

○ Incorrect password input
Protection Level 1
When the password entered is incorrect, changing of certain parameters is not allowed. In addition, the
clear operation of the totalizer cannot be used. (Totalizer start and stop operations are still allowed.)
Protection Level 2
If the password entered is incorrect, the screen will go back to the measurement mode. In addition, you
cannot enter the menu configuration selection screen as well as the totalizer screen.
○ Operation timeout function
If no operation is made for one minute or more while the converter is in the setting mode, the
mode automatically returns to the measurement mode unless the parameters are displayed on
the screen.
Menu screen
Parameter check screen
Parameter change screen
(Parameters are being changed.)

7.2.2 Setting and Calibration

In the setting mode, you can select items, or check or change the setting values as described below.
When you push
to move the digit, you can execute continuous operation by holding down the relevant
switch longer. (Holding down the switch longer automatically executes the operation continuously.)
A:DETECTOR
1 EXC CUR
2 SIZE
3 EXC FREQ
4 FLOW DIR
5 EXIT
ESC
EXC CUR
0.2000
ESC
EXC CUR
0.2000
or to scroll up or down the numeric value or alphabet, or when push
－ 46 －
When no operation is made
for 1 minute, the mode
automatically returns to the
measurement mode.
A
The screen does not return
to the measurement mode.
A
6 F 8 A 0 9 9 7