Toshiba LF620 B Series Instruction Manual page 104

Switch Operation
STEP5
STEP6
STEP7
STEP8(=END)
Note 1: If you set '000' for the password, it is considered as if the password is not used. In this case, the
password input confirmation screen does not appear when you move from the measurement
mode to the setting mode and all restrictions on the parameter setting items and calibration
screen will be removed.
Note 2: When you set your password, please be sure not to forget your password.
The password including how to check the password should be managed based on the
management standard of the system you use.
Display Example
PASSWORD
Push
LV2 453
you want to change and push
change the digit.
PASSWORD
When you push
LV2 453
to confirm whether the setting is OK or not.
If OK, push
setting, push
SET OK?
Pushing
ESC OK NO
and exits the setting screen.
PASSWORD
The currently set password and protection
LV2 453
level will be displayed.
ESC
81.23
For Protection Level 2, upon pushing
3
m /h
the screen will automatically return to
12.345
measurement mode.
3
m
－ 103 －
6 F 8 A 0 9 9 7
Description
to move the cursor to the digit
, a message appears
OK
. If you want to redo the
NO
.
ESC
cancels the setting operation
to
ESC