4.2 How to Install
4.2.1 LF620*B Type
The LF620*B type converter is used as one united body. The LF620*B type is not installed by itself.
For how to install the LF620*B type converter and a detector, check the type of the combined detector
and follow the instruction manual for the relevant detector.
LF620*B
4.2.2 LF622*B Type
The LF622*B type can be installed on a wall or to a pipe stand. Install the converter so that the front of
the cover is positioned on the vertical plane. Be sure to install it so that the conduit opening of the
converter will face towards the bottom.
LF622*B
Figure 4.1 shows examples of installation to a panel and wall. Figure 4.2 shows an example of installation
to a pipe stand.
- 18 -
6 F 8 A 0 9 9 7