Toshiba LF620 B Series Instruction Manual page 139

Note1 : Even if the custom unit is selected, the current output does not change unless the
span value is changed.
Display example
R1
2.00000
3
m /min
R1
20000.0
*dL/min
R1
10000.0
*dL/min
Note2 : Setting range of the span value depends on the custom coefficient.
If the setting high limit of the span value is 1.18 m
the setting high limit is 11800 dL/min by the custom unit.
Note3 : In the case of the multiple ranges, the custom unit is applied to Range4 from Range2.
Description
In the case of span value = 2.00000 m
When custom unit dL/min is selected, the span value is
displayed 20000 automatically based on the custom
coefficient.
Identification character "*" showing the custom unit is
displayed at the head of custom unit.
Even if setting is fixed in this state, the current output
does not change.
When the span value was changed after the custom
unit selection, the current output changes.
The span value is changed into 10000 from 20000 in
display example. The percent value doubles when
setting is fixed in this state, and the current output
changes.
－ 138 －
6 F 8 A 0 9 9 7
3
/min
3
/min,