Toshiba LF620 B Series Instruction Manual page 49

● Checking or changing the setting value (Example for changing the value of R1)
Switch operation Display example
C:RANGE
1 R TYPE
2 R1 3 R2
4 R3 5 R4
6 R HYS
7 EXIT
R1
ESC
R1
R1
R1
R1
R1
SET OK?
ESC
Menu screen for function C
Push
R1.
ESC
Push
to check or change.
100.000
The screen changes and the currently set
item appears for you to check.
3
m /h
Pushing
screen.
When you push
on the setting value and the screen is ready
100.000
to change the setting value.
3
m /h
Ready to change the setting value
500.000
Pushing
the place where the cursor is positioned.
3
m /h
(Holding down the switch longer causes the
operation to continue.)
* Pushing
below the digit of unit will change the unit to the
next unit. In addition, if a natural number is used, a
decimal point as well as the numeric value appears.
Ready to change the setting value
500.000
Pushing
next digit.
3
m /h
Ready to change the setting value
50.0000
Change the setting value using
3
m /h
In this example, 5.000 m/s is set.
Pushing
The cursor disappears and a message
50.0000
appears to confirm whether it is OK or not.
3
m /h
N O
O K
－ 48 －
6 F 8 A 0 9 9 7
Description
to move the arrow mark to
to select the item you want
ESC
returns you to the menu
, the cursor appears
increments the number in
when the cursor is positioned
moves the cursor to the
.
sets the data temporarily.
and