Connect With Pc As Wi-Fi Station - Owon XDS3204AE Manual

(6) Select Save set in the bottom menu to save current settings.
(7) Set Wi-Fi connection on PC. Enter the WI-FI settings on PC, select the oscilloscope
access point to connect, enter the set password.
(8) Set the network parameters of the OWON Oscilloscope Software. Run the
software on the computer; choose the "Ports-settings" of the "Communications" menu
item. Set "Connect using" to LAN. Set IP and Port to the same value in the
oscilloscope in the step (4). If you can get data normally, the connection is successful.
Figure 6-8 Set the network parameters of the OWON Oscilloscope Software

Connect with PC as Wi-Fi Station

The oscilloscope and PC should be on the same network (LAN).
(1) In the oscilloscope, push the Utility button. Select Function in the bottom menu.
6.Communication with PC
32